Next, run the command "dmesg" to query the device name of the USB flash drive or USB hard drive. Insert your USB flash drive or USB hard drive into the USB port on your Linux machine and wait a few seconds.Be sure to confirm the command before you run it. WARNING! Executing the mkfs.vfat command on the wrong partition or device could cause your GNU/Linux not to boot. Then format the partition as FAT with a command such as "mkfs.vfat -F 32 /dev/sdd1" Here we assume your USB flash drive or USB hard drive is /dev/sdd ( You have to comfirm your device name, since it's _NOT_ always /dev/sdd) on your GNU/Linux, so the partition table is like: # fdisk -l /dev/sddĭisk /dev/sdd: 12.8 GB, 12884901888 bytesġ5 heads, 63 sectors/track, 26630 cylinders gparted, parted, fdisk, cfdisk or sfdisk) to create a partition with a size of 200 MB or more. If the USB flash drive or USB hard drive does not have any partition, you can use a partitioning tool (e.g. Otherwise prepare at least a 200 MB partition formatted with either a FAT16 or FAT32 file system. If you already have a FAT16 or FAT32 partition on your USB flash drive then skip to the next step (3).WARNING! Confirm you have the correct path name before executing commands!įailure to do so could cause loss of data or your GNU/Linux not to boot!!!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |